Installation guide

Settings Description
Select Manager This tool displays by default the activity for all the devices (which have the service
enabled) connected to the selected Manager. Clicking it displays a list of Managers. Use
this function to see the activity of devices configured for different Managers. This
window does not list all the devices for every Manager. It is assumed that you know
which device or devices are configured with which Manager.
Filter by This is a filter based on a Device, Connector, Date Time, or the authenticated user
(choose the filters appropriately). The filter works as an “and” condition and displays only
those rows based on the condition selected.
Once the filter settings are set, every further request will use those settings, until a new
set of filters is created, replacing the old ones. Thus, only a single set of filter criteria can
be activa at any given time.
The Select one or more filters dialog appears. Enter the following values:
l Date Time: Presents date and time of the job successfully sent. The display is locale-
specific date and time. An icon (attachment) is visible in front of the Date Time field if
Document Tracking is enabled. Date and time are presented in MM/dd/yyyy and AM/PM
formats.
l Device information: Device name and Device IP address of the device from where the
job is performed.
l Authenticated user: Session Logon username or the username published by the
Connector.
Note:
The username published by the Connector supersedes the Session logon username.
l Connectors: You can filter by the connectors used for this job.
l Status: You can filter by All, Success, and Failure.
l Apply: You can apply the settings.
Export Exports the filtered list to an XML file.
The export process uses the currently set filters when creating the xml file.
Refresh icon Fetches the new transactions and scan job activity from the database.
Dialog Pin/UnPin Clicking the Pin button makes the window a TopMost window. Unpinning it removes it
from being a TopMost window.
Date Time Date and time of the job successfully sent.
Device name Device name and device IP address of the device from where the job is performed.
Authenticated user Session logon username or the username published by the Connector.
Connector Name of the Connector used for this job. Profile name and the button text (also known as
display name) is displayed in the details panel when the row is clicked.
Total scans Total number of pages scanned before any processing, page removal, and so on is
applied.