Installation guide

To access the tool, select the Advanced tab, click Tools in the Configure area, and then select Data
Publishing Mapper. The Data Publishing Mapper dialog box appears.
4.7.1 - Data Publishing Mapper settings
The keys published by the ShareScan Manager, by document services, and by third-party services, along with
information about them, appear in the first three columns in the grid; connector keys, along with information
about them, appear in the last three columns in the grid. The tool displays the warnings icon if source keys
(published keys) and destination keys (connector keys) do not match. For the keys to match, their type and
format must be the same.
The following table summarizes the settings you use to map a published key to a connector key.
Note:
You cannot modify the type or the format of keys published by ShareScan Manager or by Document Services.
Settings Description
Published Key You can add a key manually by typing a key name in the Published Key cell.
Type You can edit the Type value only for published keys that you add manually. The following
types are available: Boolean, Datetime, Float, Integer, and String.
Format You can edit the Format value only for published keys that you add manually, and only for
some types of keys. The following formats are available:
l Date format (default is MM/dd/yyyy).
l Time format (default is None).
l String format (default is None).
Note: You cannot modify the format of the Boolean, Float, and Integer types.
Display area Displays the publisher of the key, such as “System”, and any additional attributes.
Connector key If a key name is duplicated in the Published Key list or the Connector Key list, the key
name has an index associated with it in the list. At run time, the system uses the actual
key name, not the key name with the index.
At run time, ShareScan Manager converts incoming published keys to connector
keys for the specified connector profile and adds them to the publishing
interface. Connectors can access the values from the publishing interface.
Type Not modifiable.
Format Not modifiable.
Display area Displays the publisher of the key, such as “System”, and any additional attributes.
Open Enables you to open an XML file to load publishers’ keys.
Delete Enables you to delete an entry.
Save Enables you to save the mapping table.