Installation guide

Wizard window Field Description
Authentication The type of authentication to use on the SMTP server. Available only if
SMTP Basic Authentication is enabled on the server.
User login settings
Generic email A generic email address that is used as the sender account for all
email.
User Modify The user at the device can modify the sender’s email address.
Runtime: LDAP Requires the user at the device to enter the user name and password
specified for the LDAP server.
Runtime: Windows Enables users at the device to use their Windows logon information, via
the SAMAccountName attribute, to log on.
The Domain field specifies the Windows domain name, populated from
the Account Settings window. This is required if you select the
Windows option.
Available only if you select Active Directory as the server type.
Runtime: Novell The Novell tree. This is required if you select the Novell option.
Available only if you select eDirectory as the server type.
Settings summary
Enables you to review your settings. Use the Back button if you need to change any settings.
Use the Finish button to apply your settings to the connector profile.
44.3.6 - SMTP settings
Section Field Description
SMTP server
Server The IP address or DNS name of the SMTP server to use for outgoing
messages. If the server supports anonymous access, it must be disabled if
you want to use SMTP authentication.
Port The SMTP port number (default is 25).
Server requires SSL Enables Secure Socket Layer (SSL) to be used for SMTP communication. If
you select this option, you must install a valid SSL certificate on the same
device as the connector.