Installation guide

Note:
Each connector profile supports a unique group of settings. If a setting is not available for the connector you are
configuring, it will be grayed out.
Option Setting Description
File format The connector supports only JPG format.
Color compression Select High or Medium compression for color documents.
43.2.1 - Configure settings
Section/Field Name Description
Enable QuickPrint Does not display the settings screen to the user at the device. The
scanned documents print directly to the default printer, using the
default print settings from the connector.
Available printers
The printers that will be available at the device.
Set as Default printer
Enables you to specify the default printer. Indicated by a checkmark
icon before the printer's name in the list.
Move up
Moves the selected printer up in the list. If you move a printer to the top
of the list, you can confirm it as the default printer.
Move down
Moves the selected printer down in the list. Moving a printer from the top
of the list sets the new topmost printer as default.
Refresh
Refreshes the printer list.
Printer information
Gives information on the location, model, and status of the selected
printer.
Printer preferences
Informs you of the printing preferences (collation and duplex printing) for
the selected device.
44 - Scan to USB
The eCopy Scan to USB Connector enables users at an eCopy-enabled device to scan documents to an USB
device.
44.1- Configuring the connector
For the generic connector configuration options, click here.