Installation guide

Field Type Description
Device name The name of the device from which the document is scanned.
No additional settings.
Numeric Inserts numeric characters into the file name.
l Default: Only numeric characters can be entered in this field.
l Field Size: The minimum and maximum number of digits allowed.
l Leading zeroes: Pads all values with leading zeroes to make their length equal to the
maximum field size.
l Remember: The number of previous entries to display when the user is prompted for the
naming information. If set to zero, no previous values appear in the drop-down list.
Separator Character: The character that you want to use to separate the fields in the file name. The
character that you select cannot be used in any other file name field.
List Enables you to create a list of values from which the user can select a single value at the
device.
If you select the Required option, the user at the device must select a value from the list. If
you do not select this option, the user at the device can leave the field blank. If you select the
Required option and do not select the User modify option, you must set one of the list items
as the default value.
Time Inserts the time at which the document was scanned into the file name.
Format: The format in which you want the time to appear in the file name.
43 - Scan to Printer
The eCopy Scan to Printer Connector enables users at an eCopy-enabled device to scan and print documents
to a network printer, regardless of its physical location. Users can select various printing and page layout
options.
43.1- Configuring the connector
For the generic connector configuration options, click here.
43.2- Connector Document settings
Document settings enable you to specify default settings for options specific to a connector profile,
including encryption, searchable text, and file format. They also enable you to specify whether users at the
eCopy-enabled device can change the settings; user-modifiable options are available when the user presses
the Document settings button on the Preview screen.