Installation guide

38.1.2 - Navigation & Attributes settings
Field Name Description
Store in specified folder /
Allow user to navigate
Use these buttons to enable or disable the navigation form on the client side.
Default folder
Sets the default folder for document storage.
Document attributes of
default folder
Document attributes associated with the default folder. Required ones are marked with
an exclamation point.
Attribute options
l Show all attributes: Displays all attributes available in the Open Text Content Server
database.
l Show required attributes only: Limits the attributes displayed at the device to those
designated as Required in the Open Text Content Server database.
l Hide all and use preset attributes of the default folder.
Document naming
Set the document name.
If you use the Express Wizard to configure the connector profile, the user will press the connector button at
the device and the document will be scanned to the destination you specify in the wizard without any further
input from the user.
To use the Express Wizard:
1. In the Administration Console, select the Connectors tab.
2. Select the Open Text Content Server Connector.
3. To create a new Express profile, click Save current profile as, enter a name for the profile, and then
click Save.
4. In the Settings pane, configure the Display settings and make sure that none of the other available
settings is set to User modify.
5. In the Configure connector pane, click Express Wizard.
The Express Wizard window opens.
6. Click Next and then enter the Name of the destination, the database and authentication settings,
and then test the connection.
7. When the test is successful, click Next.
8. Configure the storage folder and attributes settings.
You must specify default values for required attributes.
9. Click Finish to return to the Configure tab.
10. Click Save current profile to save the profile.