Installation guide

Field Name Description
Default filter type There are two types of filter:
l Standard: All supported location types are shown at the device.
l Custom: Only the location types selected in the custom filter section
are shown at the device.
User modify Enables the user to switch between the custom and standard filters at the
device. If you select this setting, you must define a custom filter for the
user to select.
Define custom filter Enables the settings in the Custom filter section.
Custom filter Custom filter settings: You can limit the SharePoint locations available to
the user at the device to any combination of Sites, Document and Picture
libraries, folders, and lists.
Grouping type Defines how the locations are presented:
l Alphabetical: Locations appear in alphabetical order.
l By type: Locations are grouped by SharePoint location type.
Support My Site This option can only be set if the login type is set to Runtime, as the ‘My
Site’ location is tied to the user. The My Site URL is filled when the
destination URL entered on the Authentication tab has been tested.
If the test is succesful, the My Site URL is automatically filled with the
port number according to the destination URL specified on the
Authentication tab.
If no value is specified in the My Site URL, the default relative location of
the My Site locations on SharePoint 2007 (personal) are displayed.
The destination can be changed to support those configurations where
My Site is on a different server than the team site. In most cases, the
automatically filled My Site URL requires no change, you only have to
modify it when using SharePoint 2010 (as the default value of the relative
location of My Site locations is different (my/personal) than in
SharePoint 2007).