Installation guide

Field Name Description
Testing the
connection
Clicking the Test button tests the connector with the current settings.
36.2.3 - Protocol properties
The Protocol properties tab varies based on the selected protocol.
LDAPsettings
36.2.3.1 - LDAP Settings
Field Name Description
Locate server at runtime
Click the Find button to locate the LDAP server during runtime.
Always use the following server
Specify the LDAP server manually.
Server requires SSL
Check if the server requires SSL connection. The default SSLport is 636.
LDAPport
Enter the port number to be used. The default is 389.
Credential type
Select the credential type:
l Use the default credential: specified on the Protocol selector tab.
l Connect anonymously
l Use User defined credential: Specify the user DN and the password manually.
User DN
Only valid if Use User defined credential is specified.
Password
Only valid if Use User defined credential is specified.
LDAPsearch
Allows you to specify the attributes of the LDAP searches.
The available settings are:
l Base DN:Determines the LDAP search starts when typing in the LDAP
authentication form or the Send form. Empty base DN prompts an error.
l Search scope: Can be set to All levels below starting point or One level
below starting point.
l Search on: Allows defining the attributes to be searched on.
l Max results: Sets the amount of results returned. The default value is 200.
Testing the connection
Clicking the Test button tests the connector with the current settings.
36.2.3.2 - WebDAV Settings
Field Name Description
Exchange server
The name or IP address of the Exchange server.