Installation guide

The resulting final document cannot be used as an input document for another Highlight and Redact process.
23 - Associating Service with a Connector Profile
After creating a Service profile, you associate it with a Connector profile so that the Service's functionality is
available.
To associate Document Service Profiles with a connector, see section Associating a Service profile with a
Connector profile in ShareScan Help.
24 - Scanning with the service
After you have associated the Extender profile with the connector profile, the Scanner tab enables you to attach default
scanner settings to the connector profile.
24.1- Configuring scanner settings
You can specify the settings in a profile so that the user at the device does not have to change them. If the device does
not support a setting that you specify in the profile, the connector uses the device’s default settings.
To configure the default scanner settings, see the relevant section in ShareScan Help.
25 - Single Sign On Extender
The Single Sign-On Extender allows you to use all client-side ShareScan functionalities after a single
authentication, thus foregoing the need to authenticate yourself for each connector or service separately.
The availability of this feature depends on your license.
26 - Using the Extender
Follow the steps below to take the extender into use:
1. Via the Administration Console, the ShareScan Administrator ensures that you have the necessary
access rights to all connectors to be used.
2. Enable the Bypass Session Logon (authenticate user) checkbox on the ShareScan Session Logon
Service configuration screen of the Administration Console. For more information about bypassing
the Session Logon, click here.
3. Sign in to the authentication application you are using. The Session Logon screen is displayed, with
the User name field automatically filled in with the information from the card.
4. Type your Active Directory password into the relevant field.
5. Use all ShareScan workflows without further authentication needs until you press the Logout
button. Pressing that button logs you out of ShareScan, thus you can use the device only for copying
and print management, until you re-authenticate.
If you log out of the authentication application, you cannot use the device until you reauthenticate.
Notes: