Full Product Manual
28
Performance Data
PERFORMANCE CLAIMS FOR ECOP30
Substance
NSF Required
Influent Challenge
Concentration
(mg/L)
1
NSF Max. Per -
missible Product
Water Concen -
tration (mg/L)
1
Average
Influent
(mg/L)
1
Avg. / Max.
Effluent
(mg/L)
1
Avg. / Min.
Percent
Reduction
Arsenic (pentavalent)
2
0.30 ±10% 0.010 0.300 0.002 / 0.005 99.3 / 98.3
Barium
2
10 ±10% 2.0 9.1 0.12 / 0.32 98.6 / 96.5
Cadmium
2
0.03 ±10% 0.005 0.032 0.0005 / 0.0009 98.6 / 97.2
Chromium (VI)
2
0.3 ±10% 0.1 0.280 0.003 / 0.008 98.8 / 97.1
Chromium (III)
2
0.3 ±10% 0.1 0.310 0.003 / 0.004 99.2 / 97.1
Copper
2
3.0 ±10% 1.3 3.0 0.049 / 0.089 98.4 / 98.4
Cysts
2
≥50,000 #/mL
4
99.95%
3
160,000 #/mL
4
9 / 29 #/mL
4
99.99 / 99.98
Fluoride 8.0 ±10% 1.5 8.6 0.4 / 0.6 94.9 / 93.1
Lead
2
0.15 ±10% 0.010 0.15 0.0014 / 0.0025 99.0 / 98.4
Nitrate plus Nitrite (as N)
2
30 ±10% 10 28 4.5 / 5.3 83.9 / 80.8
Nitrate (as N)
2
27 ±10% 10 25 3.8 / 4.4 84.7 / 82.2
Nitrite (as N)
2
3.0 ±10% 1.0 2.8 0.69 / 0.93 75.3 / 66.8
Radium 226/228
2
25 pCi/L
5
±10% 5 pCi/L
5
25 pCi/L
5
5 / 5 pCi/L
5
80 / 80 pCi/L
5
Selenium
2
0.10 ±10% 0.05 0.099 0.002 / 0.003 98.3 / 97.0
Turbidity
2
11 ±1 NTU
6
0.5 NTU
6
11 NTU
6
0.1 / 0.2 NTU
6
99.1 / 98.0
TDS
2
750 ±40 187 770 50 / 73 93.4 / 90.5
Chlorine Taste & Odor 2.0 ±10% 1.0 1.9 0.09 / 0.19 95.2 / 90.5
Ammonium
7
1.2 ±10% 1.0
8
2.5 0.24 90
Bicarbonate
7
300 ±10% 100
8
280 10 96
Bromide
7
1.5 ±10% 3.3
8
11 1.3 89
Chloride
7
800 ±10% 250
8
770 60 92
Magnesium
7
30 ±10% 10
8
31 <1.0 97
Sodium
7
350 ±10% 117
8
340 40 88
Sulfate
7
800 ±10% 250
8
780 12 98
Tannin
7
3.0 ±10% 1.0
8
2.9 0.1 97
Zinc
7
15 ±10% 5.0
8
15 0.25 98
1
Milligrams per liter, which is equivalent to parts per million (PPM).
2
Tested by NSF International according to NSF/ANSI Standard 58.
3
NSF minimum percent reduction requirement. Acceptance level for this substance is based on percent reduction,
rather than maximum effluent concentration.
4
Particles per milliliter.
5
Pico Curies per liter.
6
Nephelometric Turbidity Units.
7
Tested by Spectrum Labs, a qualified independent laboratory, against accepted industry protocol.
8
There is no maximum permissible effluent concentration for this substance because it is not included in the chemi-
cal reduction claims listed in NSF Standard 58. The maximum effluent concentrations listed were established by
Spectrum Labs and are based on one third of the target influent.
9
Efficiency rating means the percentage of the influent water to the system that is available to the user as reverse
osmosis treated water under operating conditions that approximate daily usage.
10
Recovery rating means the percentage of the influent water to the membrane portion of the system that is avail-
able to the user as reverse osmosis treated water when the system is operated without a storage tank or when
the storage tank is by-passed.
Daily Production Rate Model ECOP30: 14.76 gal./day (55.9 liters/day)
2
Efficiency Rating Model ECOP30: 10.63%
9
Recovery Rating Model ECOP30: 21.18%
10
Chlorine Reduction Capacity Model ECOP30: 3,850 gallons (14,574 liters)