ASSEMBLY INSTRUCTIONS FOR: PSBB, PSBBWTE, PSBB60 HANGBAR 1X UPRIGHT 2X CROSSBAR 1X BASE FEET 2X CASTERS 4X LOCK WASHER 2X BUTTON HEAD SCREW 2X PSBB, PSBBWTE, PSBB60 ALLEN KEY 1X WRENCH 1X SHEET 1 OF 3
1 3 • BY HAND, SCREW BOTH UPRIGHTS INTO HANGBAR. MAKE AS TIGHT AS POSSIBLE 2 CROSS BAR FOOT FITTING UPRIGHT BASE FEET • • BY HAND, SCREW BOTH BASE FEET ONTO UPRIGHTS AS TIGHT AS POSSIBLE AND ALIGN SO FOOT FITTINGS ARE FACING EACH OTHER. NOTE: THE BASE FEET MAY NEED TO BE PARTIALLY UNSCREWED TO ACCOMPLISH THIS. PSBB, PSBBWTE, PSBB60 • TURN OUT THE BASE FEET ENOUGH SO THE CROSS BAR CAN BE INSERTED INTO THE FOOT FITTING.
4 5 STEP 4A LOCKING NON LOCKING STEP 4B LOCKING STEP 4A • ROTATE THE BASE FOOT AND CROSSBAR BACK TO CENTER AND INSERT THE CROSS BAR INTO THE OTHER FOOT FITTING. STEP 4B • SECURE THE CROSS BAR WITH THE BUTTON HEAD SCREWS AND LOCK WASHERS AS SHOWN WITH THE INCLUDED ALLEN KEY. PSBB, PSBBWTE, PSBB60 NON LOCKING • INSTALL CASTERS USING THE INCLUDED WRENCH.
