Installation Guide

MALE HALF
FEMALE HALF
1/2" LONG 5/16"
SCREW, WASHER,
AND LOCK WASHER
DIAGONAL BRACE
1.5" LONG 3/8" SCREW,
WASHER, AND LOCK
WASHER
REPEAT STEP 3 FOR THE OTHER SIDE.
DEPRESS PUSH BUTTONS AND
INSTALL HANG BARS ONTO THE
UNIT.
ASSEMBLE THE HANG BAR BY •
DEPRESSING THE PUSH BUTTONS ON
THE MALE HALF AND INSTALL IT INTO
THE FEMALE HALF.
SLIDE HANG BAR UPRIGHTS IN PLACE. •
SECURE WITH HARDWARE AS SHOWN. •
REPEAT FOR SECOND HANG BAR. •
ASSEMBLE THE DIAGONAL
BRACE ON ONE SIDE.
SHEET 2 OF 2 K41
53
4 6