Specifications

CHIMNEY MAINTENANCE
Inspect monthly during heating season. For extra safety, have your chimney inspected by an ac-
credited professional yearly, prior to the heating season.
TROUBLESHOOTING GUIDE
PROBLEM CAUSE SUGGESTED REMEDY
Boiler doesn’t reach desired
temperature.
Wood too moist. Use properly seasoned wood.
Nozzle plugged. Clean rebox.
Chimney plugged. Clean chimney.
Smoke escaping while
loading wood.
Intense wind or down draft.
Consider installing a
chimney cap.
Inadequate chimney length. Add proper chimney length.
Negative building pressure.
Ensure adequate air for
combustion.
Improper draft. Install barometric damper.
Smoke escaping from
closed boiler doors.
Leak in door gasket.
Adjust door hinges
per instructions.
Rope seal worn. Replace rope or service call.
Fan not functioning.
Thermal protection engages.
Investigate reason for boiler
overheating.
No power to unit.
Check fuse, breaker
and wiring.
Fan damaged. Call service department.
Fan blocked. Inspect and clean unit.
Fan making excessive noise.
Bearings damaged. Call service department.
Fan blades dirty. Inspect and clean unit.
Debris in fan cover. “
Control settings and
indicators off.
Not determined.
Call dealer or service
department.
26