Instructions

Operation and parameterization 56
Manual econ sens3 Version 3.0
Source (pulse output)
Setting the output as source applies a current to the output. The consumer connected to it must be
connected to the IOGND. The current can be set to 1 mA, 2 mA, 5 mA, 10 mA, or 20 mA. If the output
is activated, the user draws the current.
Digital input
VIPtrak5
IOGND
IO1..4
Load
+
-
External
Source
VIPtrak5
IOGND
IO1..4
Load
+
-
sens3
sens3
User
External
source
User
Figure 49: Digital input