Product Manual

04379 Page 6 11-01-12
ECN 3783
IV. Operation
This unit has an automatic low-fluid control sensor. Unit operates on 40-45 gallons (151.4-170.3 L.) or
more of fluid. When the fluid level decreases to 35 gallons (132.5 L.), pump will shut off. When this
occurs, add 5-7 gallons (18.9-26.5 L.) of fluid to machine to reset low fluid control sensor. This will
reactivate the pump.
Thermostat is “PRESET” do
NOT
adjust. Higher temperature could cause damage to skin.
A. Fluid Control Valves
There are two valves used for controlling fluid flow.
1. The spigot valve controls fluid flow to the spigot.
2. The brush valve controls fluid flow to the brush.
B. Fluid Filter.
Periodically remove the fluid filter and clean.
1. Remove filter from basin.
2. Unscrew nut from bottom of filter.
3. Remove filter and replace with new filter.
4. Replace washer and nut.
5. Place filter back into unit.