Intrinsically Safe Tablet PC Pad-Ex 01 Z2 Zone 2 User‘s Manual EN-1
Table of Contents BEFORE YOU START ....................................................................................... 4 PACKAGE CONTENTS ...................................................................................... 4 PRODUCT OVERVIEW ...................................................................................... 6 Front View ............................................................................................................... 6 Back View ........................................
USING THE BIOS SETUP UTILITY .......................................... 37 BIOS SETUP MENU ..................................................................................... 37 MAIN MENU .............................................................................................. 39 ADVANCED MENU ........................................................................................ 40 BOOT MENU ..............................................................................................
Before You Start Before You Start Congratulations on your purchase of this tablet PC. This rugged tablet PC is portable and provides users with maximum mobile computing experience in a wide range of working environments. Before you begin using your tablet PC, read this chapter to familiarize yourself with the main components installed in the system. Package Contents If any of following items is damaged, please contact your retailer.
Before You Start *Shoulder strap *Battery charger NOTE The pictures are for reference only, actual items may slightly differ.
Before You Start Product Overview Front View No. Item Description 1 Program button Tap to enter the chosen program. (user definition) 2 Front camera Use for video conference. 3 Ambient light sensor Use to detect the current level of visible light in the surrounding environment. 4 Microphone Record the surrounding sound. 5 Function button The button functionality can be assigned via Quick Menu. Scanner button: Press to trigger the Barcode scan function if the barcode scanner is enabled.
Before You Start Back View No. Item Description 1 Barcode scanner Scan barcodes. 2 Camera LED flash Provide additional lighting when taking pictures under low light environment. 3 Rear camera Use to take pictures. 4 Battery compartment Contain the battery. 5 Battery latch release button Press and hold the button to slide the battery latch to the unlock position. 6 Speaker Emit sound.
Before You Start Right View No. Item Description 1 Audio Combo jack Connect a headphone or an external speakers or microphone. 2 USB 3.0 ports (x2) Connect USB 3.0 peripheral devices. 3 Memory card slot Use to insert memory cards to transfer pictures, music, and data between your Tablet PC and flash compatible devices. The card reader supports SD (Secure Digital), SDXC, SDHC, Mini-SD (with adapter), Micro-SD (with adapter).
Before You Start NOTE When using the tablet PC without attaching an external keyboard, the threefinger salute (Ctrl+Alt+Del) function is defined by pressing the and buttons simultaneously. By pressing the two-button combination, it will switch to Windows Security screen, which lets you lock the device, switch to different user, sign out, change a password, enter Task Manager, or shutdown/reboot the device. Bottom View No.
Before You Start Status Indicators The status indicators in the upper side of the tablet PC light up when a particular function of the tablet PC is active. Icon Item Description Power The LED always lights on (green) when the system is running. When the system is in sleep mode, the LED blinks. RF Indicate the status of RF (WLAN, WWAN, GPS, or Bluetooth) communication. The LED always lights on (blue) when the function is enabled.
Getting Started Getting Started This chapter will help you get started using the device. Installing the Battery To install the battery, follow the steps below: 1. Align and insert the battery to the battery compartment. 2. Push completely until the battery locks into place. 3. Slide the battery latch to the lock position to secure the battery. Charging the Battery The Lithium-ion battery is not fully-charged upon purchase. To charge the battery, follow the steps below: 1.
Getting Started When to replace the Battery Pack The battery performance gradually decreases over time and usage. We recommend you to replace your battery pack after 18 to 24 months of usage. Removing the Battery To remove the battery, follow the steps below: 1. Press and hold the battery latch release button to slide the battery latch to the unlock position. 2. Remove the battery out of the battery compartment.
Getting Started Connecting the Power Your tablet PC can be powered up using the AC adapter or the Lithium-ion battery. Connecting the AC Adapter The AC adapter powers up your tablet PC and charges the battery. 1. Connect the AC adapter to the DC-in jack of your tablet PC. 2. Connect the AC adapter to the power cord. 3. Plug the power cord to an electrical outlet. Using Battery Power 1. Install a charged battery in the battery compartment. 2. Remove the AC adapter (if plugged).
Getting Started Starting Your Tablet PC Turning On Your Device Press the button until the Power LED lights up. Turning Off Your Device It is important to properly shut down your tablet PC to avoid the loss of unsaved data. To shut down your tablet PC, do the following: Tap > Power > Shut down. Wait for your notebook to turn off power completely before removing the power source (if necessary).
Operating Your Tablet PC Operating Your Tablet PC This chapter will guide you on how to use your Tablet PC. Using the Quick Menu To enter the Quick menu, tap the arrow on the task bar to display hidden icons. Then tap the Quick Menu icon ( ). You can also access the Quick menu in the All apps list. Quick Menu Overview Icon Item Airplane mode Description Tap the icon to enable/disable airplane mode.
Operating Your Tablet PC Icon Item Description WLAN Tap the icon to enable/disable the Wi-Fi (WLAN) function. WWAN Tap the icon to enable/disable the WWAN function. Bluetooth Tap the icon to enable/disable the Bluetooth function. GPS Tap the icon to enable/disable the GPS function. (Windows 8 and Windows 10 only) Barcode Tap the icon to enable/disable the Barcode function. Auto-rotate Tap the icon to enable/disable the Auto-Rotate screen function.
Operating Your Tablet PC Icon Item Description Information Tap the icon to view the battery charge cycle, Bios version, EC version, and Quick Menu version. NOTE If the icon is gray (i.e. ), this indicates the current function is disabled.
Operating Your Tablet PC Configuring the SETUP Menu Settings In Quick Menu, you can set the following settings via Setup menu: c b a d a. Programmable Button b. External GPS Antenna c. Light Sensor d.
Operating Your Tablet PC Configuring Hotkey Tap the Programmable Button tab to configure the Function or Program button. If the device is not installed with a barcode scanner, the Function button can be set as the shutter button when using the Camera. Under the Program button, select one of the following option to assign a function to the Program button: a. Stealth Mode: Select this option to allow the system to enter/leave the Stealth mode by pressing the Program button.
Operating Your Tablet PC Configuring External WWAN Antenna Switching Mode Tap the External WWAN Antenna tab to enable/disable the device to automatically switch to the external WWAN antenna when it is affixed on a docking station. Dock without external WWAN antenna: The device will NOT be automatically switched to the external WWAN antenna when docking. Dock with external WWAN antenna: The device will be automatically switched to the external WWAN antenna when docking.
Operating Your Tablet PC Configuring Light Sensor Settings Tap the Light Sensor tab to enable/disable the automatic light sensor function, define the range of illumination settings, and adjust the brightness level. Current ambient brightness reading Current preset brightness level Tap to restore the default settings. Set the range of illumination settings.
Operating Your Tablet PC Configuring External GPS Antenna Switching Mode Tap the External GPS Antenna tab to enable/disable the device to automatically switch to the external GPS antenna when it is affixed on a docking station. Dock without external GPS antenna: The device will NOT be automatically switched to the external GPS antenna when docking Dock with external GPS antenna: The device will be automatically switched to the external GPS antenna when docking.
Operating Your Tablet PC Using the Camera Using the Camera application, you can use this tablet PC to take photos or videos. Opening Camera App (Win8 and Win10 only) To access the Camera application, do one the following: a. Tap > All apps > Camera. b. In Cortana search box, enter ‘camera’. Then tap Camera.
Operating Your Tablet PC Taking Photos Tap to capture a photo. NOTE To switch between front and rear cameras, tap EN-24 .
Operating Your Tablet PC Recording Videos 1. Tap 2. Press to switch to Video mode. to start recording a video. The recording time appears on the bottom on the screen. 3. To stop recording the video, tap .
Operating Your Tablet PC Adjusting Brightness › to switch to Pro mode. 1. Tap 2. Tap 3. Do the following: to display the brightness control slider. Tap and drag upwards to brighten your photo or video. Tap and drag downwards to darken your photo or video.
Operating Your Tablet PC Setting Photo Timer 1. Tap to enter the Configuration menu. 2. Tap Photo timer to enter the Photo timer submenu. 3. Select the desired time delay. NOTE 4. Check the “Continue taking photos every X seconds until I press the camera button again” checkbox to allow the Camera app to continuously take photo at the chosen time delay. When the settings are complete, tap √ to apply them. Configuring Camera Settings 1. Tap 2. Tap Settings to enter the Settings submenu.
Operating Your Tablet PC 3. Select the desired menu option and setting. Menu Option Description Press and hold camera button Set the action when you tap and hold the Camera button. Video – Tap and hold the Camera button to create a video. Photo burst – Tap and hold the Camera button to take photos continuously. Disabled – Disable the function. Aspect ratio Select the aspect ratio of the photos. Framing grid Show or hide the framing grid lines. Video recording Set the video resolution.
Making Connections Making Connections This chapter will guide you on installing peripheral devices to maximize the use of your tablet PC. Installing the Memory Card Your Tablet PC supports different types of memory cards to provide faster data transfer. Supported types: SDHC, SDXC To insert a memory card: 1. Push down and pull to open the I/O port cover. 2. Push the memory card into the memory card slot until it clicks into place.
Making Connections Installing the SIM Card You can use a SIM card for wireless internet access. NOTE Check the availability of service and plan rates of data connection with your network service provider. To insert a SIM card: 1. Push down and pull to open the I/O port cover. 2. Push a valid SIM card into the SIM card slot until it clicks into place. Connecting the Microphone/Headset Your tablet PC is equipped with audio combo jack that enables you to use the headset or microphone.
Making Connections Connecting USB Devices You can connect your tablet PC to other USB devices, such as a mouse, keyboard, digital camera, printer, or an external hard disk drive. 1. Push down and pull to open the I/O port cover. 2. Connect one end of the USB cable to the USB port of your device. 3. Connect the other end of the cable to the USB device (if necessary). NOTE The USB cable is not included in the package. It is sold separately or it may come with your USB device.
Making Connections Connecting to Wireless Connections Your tablet PC can connect and communicate with other Bluetooth-enabled devices. Connecting to a Bluetooth Device Your tablet PC can connect and communicate with other Bluetooth-enabled devices. To add a device, follow the steps below: 1. Open the Quick menu. 2. Tap the Bluetooth icon ( 3. Tap the arrow icon ( ) to turn on the Bluetooth function. ) on the system tray to display hidden icons. 4. Tap the Bluetooth icon ( ). 5.
Making Connections 6. Select the device you want to connect, then tap Pair to start pairing. 7. Verify the pairing code on the screen of your device and pairing device match. If the passcodes match, tap Yes to complete the pairing connection. NOTE Most Bluetooth-enabled devices need to be paired with your tablet PC. The PIN you enter on the tablet PC must be the same PIN to be entered on the other Bluetooth device.
Making Connections Connecting to a Wireless Local Area Network Your tablet PC comes with a WLAN module. A wireless network can be added either when the network is detected or by manually entering the settings information. To connect, follow the steps below: 1. Open the Quick menu. 2. Tap the WLAN icon ( ) to turn on the wireless network function. 3. Tap the wireless network icon ( ) on the system tray. 4. Available wireless network connections are displayed. Tap the desired wireless network. 5.
Making Connections 6. Enter the network security key. 7. Tap Next. After the connection is established, you can see the wireless icon ( ) in the Notification area. NOTE Wi-Fi access requires service from a wireless service provider. Contact your service provider for more information. Actual wireless connectivity will depend on system configuration. Please contact your dealer for more information.
Making Connections Connecting to a Wireless Wide Area Network (WWAN) With WWAN function, it allows your tablet PC to connect to the Internet using mobile or cellular data networks. To enable the function, follow the steps below: 1. Insert a valid SIM card into the SIM card slot. 2. Open the Quick menu. 3. Tap the WWAN icon ( WWAN function. ) to turn on the 4. Launch Skylight application. On Windows desktop, tap “Skylight” ( ). Tap > Skylight. 5.
Using the BIOS Setup Utility Using the BIOS Setup Utility Your tablet PC has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the tablet PC. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS Setup Utility allows you to configure your Tablet PC basic settings. When you turn your tablet PC on, the system reads this information to initialize the hardware so that it can operate correctly.
Using the BIOS Setup Utility Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: Keyboard Description Selects screen. Moves up/down to select items. Enter / Confirms the selection and enters the selected menu screen. Double-click +/- Changes an option for the selected items. F1 Displays the Help screen. F2 Invokes the previous values. F3 Loads optimized default values. F4 Saves the changes and exits Setup.
Using the BIOS Setup Utility Main Menu The Main menu displays the system overview information about the device, including the system date and time. Item Description BIOS Information Display the BIOS version detected during boot up. System Information Display the CPU type and speed, total memory, mainboard version, Intel PCH SKU name, ME FW version, and ME Firmware SKU. System Date Set the system date. System Time Set the system time. Access Level Display the access level user.
Using the BIOS Setup Utility Advanced Menu The Advanced menu allows you to configure specific system settings. Item Description Wake on LAN/WLAN Enable/disable the system to remotely wake on the device from Sleep state (S4/S5). Wake on WLAN only supports S4. Wake on power from dock Enable/disable the system to wake on the device with the power from the docking station. BARCODE Enable/disable the barcode function.
Using the BIOS Setup Utility Boot Menu The Boot menu allows you to configure the boot settings and boot sequence. Item Description Bootup NumLock State Select the keyboard NumLock state. Fast Boot Enable/disable boot with initialization of a minimal set of devices required to launch active boot option. It has no effect for BBS boot options. CSM Support Enable/disable the system to launch an older OS. Video Control the execution of the selected Video OpROM type.
Using the BIOS Setup Utility Security Menu The Security menu allows you to set or change the Administrator and User passwords. Item Description Administrator Password Create or change the Administrator password. User Password Create or change the User password.
Using the BIOS Setup Utility Save & Exit Menu The Save & Exit menu allows you to save/discard the changes and restore the default values for all setup options before leaving the BIOS Setup Menu. Item Save Changes and Reset Description Reset the system after saving the changes. Discard Changes and Reset the system setup without saving any changes. Reset Restore Defaults Restore the default values for all the setup options.
Appendix Appendix Copyright Copyright© 2016. All rights reserved. No part of this user manual may be transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of the manufacturer. Information is subject to change without prior notice.
Appendix governing this device. Changes or modifications not expressly approved by the system's manufacturer could void the user's authority to operate the equipment. Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation.
Appendix Cet appareil numérique de classe B est conforme aux normes canadiennes ICES003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement.
Appendix CAUTION FOR ADAPTER THE TABLET PC IS FOR USE WITH DEDICATED AC ADAPTER. BATTERY SAFETY DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS. CAUTION FOR RJ-45 The RJ-45 jack is not used for telephone line connection.
Appendix Ex - Data 1 ATEX EC type approval test certificate no. 2 EPS 16 ATEX 1 163 X Ex-marking † 2G Ex ic IIC T4 Gc IP64 † 2D Ex ic IIIB T135°C Dc IP64 Ambient temperature -10 °C ≤ Ta ≤ +55 °C IECEx IECEx Certificate of Conformity no. IECEx EPS 16.
Appendix Safety Instructions These safety instructions should always be observed to ensure safe operation when handling the device. Do not place this device on an unstable table or surface. The device may fall, causing serious damage to its housing and components. Do not cover the device, or block the air ventilation holes of the device with any other objects. Do not use any sharp object to tap on the display screen. Do not expose the device to direct sunlight and dusty environments.
23 Pad-Ex 01 D2 User‘s Manual
123 Pad-Ex 01 D2 User‘s Manua
300035AL03A00 | PA000704 / 04/2017 WEEE-Reg.-Nr. DE 934 99306 Subject to change without notice.
