Operation Manual

18
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Inserting the SIM Card (Zone 2 models)
1 Switch Off Phone
Ensure that the phone is switched off.
2 Lift Cover
Lift the battery cover and remove
the battery. For instructions refer
“Inserting the Battery (Zone 1
models)” on page 14 and “Inserting the
Battery (Zone 2 models)” on page 14..
3 Place SIM Card
Place the SIM card by pushing it
upward in the designated slot located
under the battery.
4 Lock Cover
Reinsert the battery and the cover.
Turn the battery cover screws
clockwise to lock the battery cover.
Removing the SIM Card (Zone 2 models)
1 Switch Off Phone
Ensure the phone is switched off.
2 Lift Cover
Lift the battery cover and remove
the battery. For instructions refer
“Inserting the Battery (Zone 1
models)” on page 14 and “Inserting
the Battery (Zone 2 models)” on
page 14..
3 Remove SIM Card
Remove the SIM card by pushing
it downward from the slot.
4 Lock Cover
Reinsert the battery and the cover.