Operation Manual

Chapter 6 — Configure the Computer
64
Modify Channel Settings
You can manually select the channels the 802.11 radio uses for
communication.
1 Tap All Apps > Settings > Extras > Wi-Fi Radio Settings.
2 Tap Channel Settings.
3 Swipe left or right to view the channels available under the 2.5 GHz,
5 GHz, and DFS bands.
4 Select the boxes next to the channels to enable or disable them.
5 Tap to save the settings.
Change Roaming Settings
By default, roaming is enabled for the 802.11 radio. When enabled, the
Wi-Fi radio automatically roams from one access point to another as
needed to provide seamless connectivity.
1 Tap All Apps > Settings > Extras > Wi-Fi Radio Settings.
2 Tap Roaming Settings.
3 Tap the Roaming check box to disable roaming.
4 Tap to save the settings.
Connect to an Ethernet Network
By default, the CT50 -Ex is configured to obtain IP addresses
automatically through the DHCP server. In most cases, you can simply
insert the CT50 -Ex into an Ethernet dock and connect to the Ethernet
network. To connect the computer to an Ethernet network, you need an
Ethernet dock.
1 Make sure the dock is connected to your Ethernet network.
2 Place the computer in the dock.
3 Tap All Apps > DiagnosticInfoW10 to view the assigned IP
address.
How to Connect to Virtual Private Networks
The computer suppor
ts connecting to virtual private networks (VPNs).
To configure VPN access, you must obtain details from your network
administrator. To establish a VPN connection, you must first create a
VPN profile on the CT50 -Ex.