Operation Manual

Chapter 3 — About the

Scanner

Symbology Settings

e Symbology Settings define the bar code symbologies the scanner

will decode with the ScanDemo app.

• Touch the toggle box next to a symbology to enable or disable it.

• Swipe up or down to scroll through the list of available symbologies.

For a c

omplete list of all available symbologies, see Appendix A,

“Specifications” on page 77.

Profile Settings for ScanDemoW10

The built-in Point of Service (POS) profiles are applied by the

ScanDemoW10 app using the Microsoft POS application program

interface (API), ClaimedBarcodeScanner.SetActiveProfileAsync. This

API sets the active profile on the CT50 -Ex bar code scanner. The

profile strings defined by the \Documents\Profile\

HoneywellDecoderSettingsv2.exm file are returned to the app using

BarcodeScanner.GetSupportedProfiles. It gets the list of profiles

supported by the bar code scanner.

Scan Mode There are three options for scan mode:

• Normal: Normal mode requires you to press

Scan or one of the Scan buttons between

each scan.

• Automatic:

Automatic mode activates the

scanner for continuous scanning without

requiring you to touch Scan on the screen

each time.

• Continuous: Continuous mode activates the

scanner only when you touch and hold one of

the Scan buttons.

Automatic Interval Adjusts the automatic interval from 0 to 30

seconds between each scan.

Scan Settings and Descriptions (continued)

Scan Setting Description

Profile Settings and Descriptions

Profile Description

HON:Res

et Resets all symbology settings to disabled.

HON:EnablePreviewOnDecode Profile not supported in ScanDemoW10.