Operation Manual

Chapter 1 — About the Com
puter Features
11
Check the Battery Settings
I
n addition to the Battery status LED, you can get battery information
from the Battery Saver app.
1 Scroll to the bottom of the main screen and tap All apps > Settings
> System > Battery Saver.
2 If the battery is not charging, tap the toggle to turn on the Battery
Saver.
3 Tap Battery saver settings.
4 From the setting screen, you can set these options:
• Turn battery saver on automatically if my battery falls below:
When enabled, turns the Battery Saver features on when the
battery charge level drops below the level selected with the slider.
The default is 20%.
Battery Status LED Descriptions
LED State Description
St
eady green The computer is connected to a charger and the
battery is more than 95% charged.
Blinking green The computer is connected to a charger and the
battery level is between 61% and 95% charged.
Steady amber The computer is connected to a charger and the
battery level is between 0% and 60% charged.
Blinking red There is a battery error or the computer is not
connected to a charger and the battery level is below
15% charged.
If there is a battery error, the battery may not be
charging because it is missing, faulty, or outside the
allowable charging temperature range. If it is outside
the charging temperature range, charging will resume
when the battery temperature returns to the
acceptable range of 0 °C to 45 °C (32 °F to 113 °F).
Off The computer is not connected to external power, the
battery is operating normally, and the battery level is
above 15% charged.