Operation Manual

Chapter 6 — Configure the Computer

Rename or Disconnect a Paired Device

u can rename or disconnect a paired Bluetooth device from the

Settings app.

1 Open the Settings app and tap Bluetooth.

2 Tap the Settings icon next to the paired device.

• To rename the device, type the new name, and then tap OK.

• To disconnect the device, tap FORGET.

About Serial and USB Communications

You can use these accessories to transmit data to and receive data from

anothe

r device through serial or USB communications:

• vehicle dock

• HomeBase

• Ethernet HomeBase

• USB snap-on adapter

• RS-232 DEX adapter

For information on these accessories, contact your local sales

representative.

If you have a problem with your PC recognizing the USB device, you can

download and install the Honeywell-aidc-usb-driver. The driver is part of

the Honeywell_MobilitySDK_Android software .zip file. The SDK is

available from

www.honeywellaidc.com > Products > Mobile

Computers > Handheld Mobile Computer > Dolphin CT50 >

Software tab.

About Near Field Communication (NFC)

NFC technology

provides the ability for short-range, wireless data

transfer between the CT50 -Ex and NFC tags or other NFC enabled

devices placed in close proximity to the back of the computer. NFC

equipped CT50 -Ex models support the following modes of operation:

• NFC tag reader/writer mode: The computer reads and/or writes

digital information from or to an NFC tag.

• Peer-to-Peer (P2P) mode: The computer uses Android Beam and/

or Bluetooth technology to transfer screen content (such as a picture,

contact information, Web page url, or file) between NFC enabled

devices.