Operation Manual

Chapter 3 — About the Scanner

Scan a Bar Code

The scanner has an aiming beam to help you correctly frame bar codes.

It also supports omni-directional (360°) scanning to make it easier for

you to scan bar codes.

1 Tap All Apps > Demos > ScanDemo.

2 Point the scanner window at the bar code and hold the computer

steady a few inches from the label.

Notification Settings

Setting Description Default

Good Read Notification Enables or disables a good read notification.

The notification consists of a green blink of the

Good Read LED, a short beep, and an optional

short vibration.

Enabled

Bad Read Notification Enables or disables notification of a failed scan.

The notification consists of a red blink of the

Good Read LED, an error beep, and an optional

short vibration.

Disabled

Vibrate Enabled Enables or disables whether the computer

vibrates when there is a good or bad read.

Disabled

Note: Before you start scanning bar codes, use the Settings app to

enable only the bar code symbologies that you need.