Operation Manual

Chapter 3 — About the Scanner

Symbology Settings

Use the Symbology Settings to enable and disable bar code

symbologies. Tap a symbology to view and modify the symbology

configuration parameters.

Scan to Intent Enable or disable special handling of scan-to-intent bar

codes. Applies to bar codes in one of the following

formats:

‘//’ ACTION

‘//’ ACTION '$' extra-data

Where:

ACTION and extra-data are any string of characters.

Launches an application listening for the intent:

Intent action: “com.honeywell.scantointent.intent.action.”

+ A

CTION

Intent extra

“com.honeywell.scantointent.intent.extra.DATA” contains

the remainder of the bar code data after the first ‘$’

character.

Corresponds to BarcodeReader property:

PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT

Enabled

Launch EZ Config Enable or disable special handling of EZConfig bar

codes. Applies to EZConfig bar codes, which are

encoded with the Aztec symbology and containing

specific header data.

Corresponds to BarcodeReader property:

PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_

CONFIG

Enabled

Data Processing Settings (continued)

Setting Description Default

Symbology Settings

Setting Default

Code 128 Enabled

GS1-128 Enabled

Code 39 Enabled

Datamatrix Enabled

UPC-A Enabled