User manual

3. Getting Started
3.9. Connecting MC Toolkit to a PC
Revision 12 MC Toolkit User Manual 27
May 2013
3.9 Connecting MC Toolkit to a PC
Connecting MCT101
1. Insert the PDA into the docking station.
2. Connect the USB cable to a free USB port on the PC.
3. Follow the Active Sync/Mobile Device Center instructions appearing on the screen to establish the
connection between the PDA and the PC.
Connecting MCT202
1. Connect the USB connection cable to a free USB port on the PC.
2. Insert the MC Toolkit into the docking station or connect the USB cable to USB connection set.
3. Follow the Active Sync/Mobile Device Center instructions appearing on the screen to establish the
connection between the MC Toolkit and the PC.