User manual

3. Getting Started
3.3. Safety instructions
18 MC Toolkit User Manual Revision 12
May 2013
3.3 Safety instructions
General safety instructions
Persons using the unit must observe the standard safety regulations and read the certificate to prevent incorrect
operation or misuse of the unit.
For MCT101
The general safety instructions while using MCT101 are as follows:
Ensure that all the screws are tightened before using the modem.
Ensure that the communication port connector’s screws are tightened.
Refer to the wiring diagrams before connecting the MC Toolkit to the device.
Handle the PDA connector cable carefully, as improper handling might damage the pins.
The test leads must not be shorted as they might damage the equipment.
Do not attempt to open the modem in any condition, as it might damage the equipment.
Refer to the MCT101 modem battery replacement in section 7.1 while replacing the batteries.
For MCT202
For general safety instructions while using MCT202, refer to the “Safety regulations – General safety
instructions” section ofi.roc x20 (-Ex) Pocket PC Safety Instructions Guide” that is shipped with the
MCT202 product
The safety instructions from the above Safety Guide have been updated below as they are
applicable to MCT202 product. The following additional safety regulations must also be
observed:-
- The unit must not be opened within the Ex-area.
- The battery may only be changed by Honeywell or a person trained by Honeywell outside of the Ex –
area.
- Additional or spare batteries must not be carried in the Ex-area
- The battery may only be charged outside the Ex-area with the designated charging device.
- After the battery is charged, observe a waiting period of 3 minutes and conduct a brief functional test
before taking it into the Ex-area.
- Avoid using the unit in aggressive acidic or alkaline solutions.
- Ensure that the MCT202-X_ Ex unit is not taken in to Zone 0 areas.
- Ensure that the MCT202 - Y_ Ex unit is not taken into Zone 1/0 or 21/20 areas.
- Ensure that the MCT202 - ZZ unit is not taken in to Ex-area.
- Electromagnetic waves, which can arise with the i.roc when using WLAN or Bluetooth functions, can
cause disturbances and endanger your health! Since no definite statements can currently be made about
the immunity from disturbances of heart pacemakers, we recommend users of pacemakers to avoid
using transmitters generally.