User manual

Revision 12 MC Toolkit User Manual 15
May 2013
3. Getting Started
3.1 MC Toolkit Installation
MC Toolkit software is fully loaded in the factory on all new orders. The following provisions are
available for all the existing MC Toolkit users.
Existing MCT202 Users: Migration path is available for Existing MCT202 users having modem
firmware version 1.0 as well as 2.0.
• Users having MCT202 with Modem firmware version 2.0 can readily use the FDC application
once the installation of the MC Toolkit software is completed as per the instructions given in the
installation instruction sheet.
• Users having MCT202 with Modem firmware version 1.0 have to upgrade the firmware using
modem code download program. Although this is a part of MC Toolkit software installation, the
Modem code download program has to be run to upgrade the firmware to version 2.
The installation instruction for the above process is in document 34-ST-33-59 and Modem firmware
upgrade procedures are in the User Guide 34-ST-25-33.
Existing MCT101 Users: Migration path is available for all the existing MCT101 users and it is
supported through the replacement kit Part no: 50020492-501.
The installation instruction sheet 34-ST-33-58 which is a part of the above kit, will guide the customer to
migrate to the new application.
All the above documents are available at:
http://hpsweb.honeywell.com/Cultures/en-US/Products/Instrumentation/configtools/mctoolkit/default.htm