User manual

MC Toolkit Maintenance
7.1. MCT101 modem battery replacement
138 MC Toolkit User Manual Revision 12
May 2013
How to replace battery
Before replacing, obtain a new CR-V3p battery. Honeywell recommends Panasonic CR-V3p.
Other models may perform adequately but not as well.
WARNING !
Never remove the cover of the battery compartment, or attempt battery
replacement in areas designated as having a potentially Explosive
atmosphere.
Step Action
1
Remove the screw that holds the battery cover in place, and remove the
cover from the battery compartment.
2
Press lightly on the bottom of the battery as shown in the picture below,
rotating the battery outward at the top. Note the orientation of the battery in
the compartment, and then remove it from the case.
3
Noting orientation of the new battery and the terminals, insert the new battery
into the case.
4 Replace the cover and the retaining screw.