User manual

Managing DE Devices using MC Toolkit Software
5.8. Reference Data
118 MC Toolkit User Manual Revision 12
May 2013
Dialog Field
V
alue
DE Configure
(continued)
Damping (ST only) (seconds) 0.00
0.16
0.32
0.48
1.00
2.00
4.00
8.00
16.0
32.0
Span Floating point (URV – LRV)
Linearization (STT only) Linear Non-Linear
Conformity (ST only) Linear Square Root
Auxiliary Configure
(STT only)
Critical Status Latching Enabled Disabled
NAMUR Enabled Disabled
CJ Compensation Internal External
CJ Temperature Floating point
Write Protection Enabled Disabled
Password Write protection password (4 digits)
Change Password
(STT only)
New Password 4 digits
Confirm New Password 4 digits
Monitor Input Transmitter input in engineering units (floating point)
Output Transmitter output in percent (floating point)
SV Secondary variable (floating point)
Device Status Gross Status Critical Non-Critical Invalid
Database
Critical Critical status strings
Non-Critical Non-critical status strings
Local Meter
(ST 3000)
Meter Hardware Full Functional
Meter
Meter, NO
Local Span or
Zero
No Meter, Local
Span & Zero
No Meter
Installed
Meter Units %
inH
2
O @ 39°F
mmHg @ 0
°C
psi
KPa
MPa
mBar
bar
g/cm²
kg/cm²
mmH
2
O @ 4°C
mHg @ 0C
mH
2
O 4°C
GPM
GPH
Custom