User manual

5. Managing DE Devices using MC Toolkit Software
5.7. Offline Configuration
Revision 12 MC Toolkit User Manual 113
May 2013
DE Fields and Values
Field Value
Bus Type Analog - for communication mode of Analog (string)
DE – for communication mode of 4 byte or 6 byte DE (String)
Dev Type Device Type (string)
Tag ID Tag id (8 chars string)
Ser num Serial number of transmitter (String)
Manufact Manufacturer string
Model Model Number of transmitter = Firmware Version (String)
Transfer Function (Called
Conformity in ST, Linearization
in STT devices)
Linear or Square Root in ST
Linear and Non-Linear in STT
LRV Transmitter input low in engineering units (floating point)
URV Transmitter input high in engineering units (floating point)
PV Units (STT only) °C
°F
°R
K
PV Units (ST Only)
inH
2
O @ 39°F
inH
2
O @ 68°F
MmHg @ 0
°C
PSI
KPa
MPa
mBar
bar
g/cm²
kg/cm²
inHg @ 32°F
mmH
2
O @ 4°C
mH
2
O @ 4°C
ATM
inH
2
O @ 60°F
Output Range : Out Low (Not
displayed on the parameter
screen)
Transmitter output low in percent (floating point)
Output Range : Out High (Not
displayed on the parameter
screen)
Transmitter output high in percent (floating point)
Output Range : Out Units (Not
displayed on the parameter
screen)
ma (milliamps)
LRL Lower Range Limit(Floating point)
URL Upper Range Limit(Floating point)
Damping (STT only) (seconds) 0.00
0.30
0.70
1.50
3.10
6.30
12.70
25.50
51.10
102.30