User's Manual
Table Of Contents
- General Information
- Safety Guidelines
- Battery usage Guidelines
- Getting Started
- Your Sonim XP6 IS /ECOM EX-HANDY 09
- Managing Phone Settings
- Managing Wireless and Network Settings
- Managing Phone Security Settings
- Managing Personal, Account and System Settings
- Managing Contacts
- Add a New Contact
- View the Contact Details
- Sending a Message from Contacts
- Dialing a Number from Contacts
- Editing the Contact Details
- Importing SIM Card Contacts to Phone
- Import From Storage
- Exporting Phone Contacts to Storage
- Managing Contact Settings
- Managing Phonebook Settings
- Searching Contacts
- Deleting a Contact
- Managing Calls
- Making a Call
- Dialing a Number via People
- Answering an Incoming Call
- Adding a Contact From Phone Screen
- Viewing All Contacts from Phone Screen
- Viewing Call History
- Deleting Call History
- Deleting Frequently Called Contacts List
- Managing Call Settings
- Changing Ringtones
- Activating Touch Tones
- Activating Vibrate Mode
- Setting Up Your Voicemail
- Editing Quick Responses
- Managing Fixed Dial Numbers
- Monitoring Incoming and Outgoing Calls
- Turn on proximity sensor
- Setting TTY Mode
- DTMF Tones
- Call Barring
- Call Forwarding
- SIP Accounts
- Use Internet Calling
- Sending Messages
- Using the Keyboard
- Installing and Using Android™ Applications
- Google Search™ and Google Now™
- End User License Agreement
- Federal Communication Commission Interference (FCC) Statement
- Règlement FCC
- Industry Canada (IC) Statement
- Règlement IC
- CE Statement
- Declaration of Conformity
- Index
30
Managing Wireless and Network Settings
Connecting to Wi-Fi Network
Wi-Fi is a wireless network technology that can provide
Internet access at distance upto 100 Feet, depending
on the Wi-Fi router and surroundings, when you connect
your mobile device to the wireless router.
You can access Internet when you connect your XP6 to a
Wi-Fi network. To connect your phone to a Wi-Fi network,
1. From the Home or All Applications screen, tap
Settings (
).
2. Enable Wi-Fi , located under Wireless & Networks
settings.
3. Tap Wi-Fi. A list of Wi-Fi routers present within your
phone’s accessible range are displayed.
4. Tap your preferred network. Enter the WEP/
WPS/ WPA key (if it is a secured network) and tap
Connect. To verify the password before connecting,
enable Show password.
It is always recommended to make your Wi-Fi
router secure and also to connect your phone
to a secure network.
Adding a New Network
To add a new Wi-Fi network
1. In the Wi-Fi settings screen,Tap Add Network
button (
).
2. Enter the following details:
• Network SSID: The wireless network ID.
• Security: Set the security type to None, WEP,
WPA/WPA2 PSK, 802.1x EAP.
3. Enable Advanced Settings to set the Proxy details
and IP settings.
Editing a Network
1. Press and hold your preferred network.
2. Select Modify Network. The network setting
details such as connection status, signal strength,
connection speed, security type, IP address and
password are displayed.
3. Tap Save to save the settings or Cancel to exit to
the previous screen.
Forgetting a Network
1. Press and hold your preferred network.
2. Select Forget Network. The selected network is
removed from the list.
Enabling WPS For your Router
To setup a secure Wi-Fi network, press WPS Push button
(
) in the Wi-Fi network Settings and press the WPS
button in your router, when prompted.
Connecting to Bluetooth Devices
Bluetooth is short-range wireless communication
technology used to communicate between the devices
over a distance of about 8 meters.
You can perform the following tasks using Bluetooth
paired devices.
• Transfer media les and contacts between mobile
devices connected using Bluetooth.
• Access Internet through a Bluetooth device that is