User's Manual

• It must be ensured that the device is not taken into zones 0 or 20.

• In IIC (Zone) hazardous areas the applicant has to ensure that the Metal

Part of the Belt Clip is electrostatically earthed, e.g. by the use of ESD

clothing.

• The belt clip shall only be installed outside of the hazardous areas.

• The belt clip shall not be removed from the device inside hazardous areas.

• The battery module may only be charged outside the hazardous areas and

only by using safety box ‘SB01’ in between the power plug and the device.

• For charging rst connect the safety box “SB01” to the Ex-RSM Aurelis

BT, then connect the safety box to an USB-A socket. If done differently, the

safety box may get harmed.

• The battery module may only be charged in a temperature range of 0-45°C

Only valid for model Ex-RSM Aurelis BT

• It must be ensured that the device is not taken into zones 0 or 20!

Only valid for model Ex-RSM Aurelis BT Gb

• It must be ensured that the device is not taken into zones 0,20,21 and 22!

3.2 Accessories

Only the following headsets are allowed to connect to the Ex-RSM Aurelis*:

Ex-TRA PTT-E Ex-TRA FTS

Ex-TRA PTT-EH Ex-TRA FT

EX-TRA NB Ex-TRA ComCom

Ex-TRA VT

4. Ex-Data

4.1 Ex-RSM Aurelis BT

4.1.2 NEC & CEC

Ex-Marking: Class I, Division 1, Groups A-D T4

Class II, Division 1, Groups E-G T4

Class III, Division 1

Ambient temperature: -20°C ≤ Ta ≤ +50°C

Approved for Division 1 and 2 Class I,II,III