User's Manual
Sprint Direct Connect 40
4. When you are finished, press to end the call. By default, when you end a Group Connect
call that you initiated, all other participants are dropped from the call. To change the
settings, refer Group Call Options.
Note: If you get an error message saying that your contact is not reachable via Direct
Connect or this number is not DC capable, please check to see that you have entered or
highlighted a valid Direct Connect number.
Make a Group Connect Call from History
Follow the instructions below to make group connect call from call history.
1. Press Menu (left selection key) > History.
2. Highlight a group entry and press the DC button.
3. Continue the Group Connect call as described previously.
Make a Group Connect Call by Creating Groups
Follow the instructions below to make group connect calls after creating a new group.
1. In standby mode, press Contacts (right selection key) > DC Groups >Options > New
Group.
2. Enter the group name and select Save.
3. Select View to view the group details.
4. Select Add to add members from Contacts.
5. Highlight a contact and press Select.
The selected contact is added to the group.
Note:
Direct Connectcapable number (DC Only or Mobile+DC).
6. After adding the required contacts, highlight the group and press the DC button.
7. Continue the Group Connect call as described previously.
Make a Group Connect Call Without Saving Groups
Follow the instructions below to make group connect calls without creating a new group.
1. In standby mode, press Contacts (right selection key)
2. Highlight multiple contacts with DC number.
3. Press the DC button to initiate a Group Connect call.