User's Manual
Sprint Direct Connect 39
Send Alert with MSG: Sends an alert with a message. Highlight a message from the
displayed list of messages.
3. Select Send (menu key). The receiving phone emits an incoming tone and displays an
alert or an alert with the selected message.
Reply to Call Alerts
Call Alerts continue to repeat for a set amount of time (default is five minutes) or until you return
the call or dismiss the alert.
Follow the instructions below to reply to a call alert.
1. When a call alert is displayed, press and hold the DC button to return the call.
2. Continue with the Direct Connect call as previously detailed.
To dismiss a call alert:
Press the Red button (End call button).
Group Connect
A Group Connect call is a Direct Connect call made to up to 20 Direct Connect users with Sprint
phones nationwide at one time. You can make a Group Connect call in following ways:
By setting up a group entry in Contact on your phone.
By selecting or entering multiple numbers for a one-time call.
For more information about creating Direct Connect contact groups, refer Direct Connect
Contact Groups.
Important: When making a Group Connect call or creating a group list for Group Connect calls
capable number. If you select a number
that is not Direct Connectcapable, the name will be added to the list, but Group Connect calls
will not go through to that group member.
Make Group Connect Calls
Follow the instructions below to make Group Connect calls by selecting saved groups from your
Contacts, selecting from group calls saved in History, or by creating groups for one-time use.
1. In standby mode, press Contacts (right selection key).
2. Highlight a group and press the DC button to begin the Group Connect call.
3. Continue the Group Connect call in the same manner as a one-to-one Direct Connect
call.
Note: Only one person at a time may speak on a Group Connect Call.