User's Manual

Get Started 14
2. Lift the battery cover to view the battery slot.
3. Raise the upper end of the battery from the slot and remove the battery.
4. Close the battery cover. Rotate the battery cover screws in clockwise direction. You can
use the screwdriver provided to tighten the screws. Ensure not to over tighten the
screws.
Charging the Battery
The battery provided with your mobile phone does not come fully charged. We recommend that
you charge the mobile for five hours before you use your mobile phone for the first time.
Note:If the battery is completely out of charge, the charging icon appears only after several
minutes, when the charger is connected.
Warning: Do not use an incorrect battery type as it might cause explosion.
Complete the following steps to charge the phone battery.
1. Insert the charger plug into a power outlet.
2. The charger port is located on the left side of the phone. To access the charger port, lift
the cover with the USB sign. Insert the 3.5mm jack/connector of the charger into the
port.
Alternatively, you can use the standard USB cable and adaptor to charge the phone
battery. Insert the adaptor into the charger port of the phone. Connect one end of the
standard USB cable to the adaptor and the other end of the USB cable to the PC.
3. If the battery is being charged when the phone is switched off, only the battery icon is
displayed (as shown in the adjacent figure).