User's Manual

Get Started 13
2. Lift the battery cover to view the battery slot.
3. Insert the battery and push it into the battery slot such that the three metallic contacts at
the bottom of the battery are aligned with the metallic contacts within the battery
compartment.
4. Close the battery cover. Rotate the battery cover screws in clockwise direction. You can
use the screwdriver provided to tighten the screws. Ensure not to over tighten the
screws.
Removing the Battery
Complete the following steps to remove the Sonim certified battery from your Sonim XP STRIKE
IS phone.
1. Rotate both battery cover screws in counter clockwise direction (as shown in the figure).
You can use the screwdriver provided. Sometimes the screws may be tight and extra
effort is required to open them.