User's Manual

Datum // date
10.07.2014
Teile-Nr. // part no.
300011
Dokument-Nr. Revision //
document no. revision
300011AL11E 07
Head Module Settings
User Manual
Seite/gesamt // page/total
8 / 25
Dokument erstellt // document created
SAS387 10.07.2014
Dokument geprüft // document checked
FIH091 10.07.2014
User Manual: Head Module Settings ● Ablageort: C:\Users\de0216\Documents\Quellcode\EcomService\user_manual_head_module_settings\300011AL11E07_user_manual_head_module_settings.docx ● template no.: 0730QV06A03 ● template created: HAO006 20.01.2011 ● template checked: BEA373 20.01.2011 ● location: ISO drive ●
1.7 #T – LID (RFID reader)
To make some changes for the LID Trovan reader, enable the reader in the „Enable Module“ section in
the Head Module Settings. Then click on “Setting #T - LID“ (see Pic10). In the next window (see Pic11)
make your changes you want to do for the LID Trovan reader and save them by clicking the OK button.
Pic10: Head Module Settings after
enabling the LID Trovan reader Pic11: LID Trovan reader settings
Explanation of the settings for the #T – LID:
Setting
Description
COM Port
Serial port of the reader.
timeout for reading (in seconds)
Timeout for reading a TAG (a value from 1 to 25 seconds is
allowed).
Output Data
Format of the output data (HEX or ASCII).
1.8 #U|E – UNI900 (very high frequency RFID reader)
To make some changes for the UHF reader, enable the reader in the “Enable Module” section in the
Head Module Settings. Then click on “Setting #U|E – UNI900” (see Pic12). In the next window (see
Pic13) make your changes you want to do for the UHF reader and save them by clicking the OK button.
Pic12: Head Module Settings after
enabling the UHF reader Pic13: UHF reader settings