User's Manual

Datum // date
10.07.2014
Teile-Nr. // part no.
300011
Dokument-Nr. Revision //
document no. revision
300011AL11E 07
Head Module Settings
User Manual
Seite/gesamt // page/total
7 / 25
Dokument erstellt // document created
SAS387 10.07.2014
Dokument geprüft // document checked
FIH091 10.07.2014
User Manual: Head Module Settings ● Ablageort: C:\Users\de0216\Documents\Quellcode\EcomService\user_manual_head_module_settings\300011AL11E07_user_manual_head_module_settings.docx ● template no.: 0730QV06A03 ● template created: HAO006 20.01.2011 ● template checked: BEA373 20.01.2011 ● location: ISO drive ●
Note:
Head modules with the labels NH-UNI13-AB and SH-SE955-UNI13-AB are able to read the UID and
data from a Mifare NFC TAG. Head modules with the labels NH-UNI13-AA and SH-SE955-UNI13-AA
are just able to read the UID of a Mifare TAG. For the head modules with an “AA” it is recommended to
set the option “data length” to 0 and it is necessary to enable the “set UID in front” option in the head
module settings. If you want to read a Mifare TAG with an NH-UNI13-AA or SH-SE955-UNI13-AA it is
also recommended to enable only the Mifare transponder in the head module settings and to disable all
other transponders.
1.6 #Q – ARE8 (RFID reader)
To make some changes for the ARE Trovan reader, enable the reader in the “Enable Module” section in
the Head Module Settings. Then click on “Setting #Q – ARE8” (see Pic8). In the next window (see Pic9)
make your changes you want to do for the ARE Trovan reader and save them by clicking the OK button.
Pic8: Head Module Settings after
enabling the ARE Trovan reader Pic9: ARE Trovan reader settings
Explanation of the settings for the #Q – ARE8:
Setting
Description
COM Port
Serial port of the reader.
timeout for reading (in seconds)
Timeout for reading a TAG (a value from 1 to 25 seconds is
allowed).
Output Data
Format of the output data (HEX or ASCII).