User's Manual

38 39
Navigate in Intermec Settings
You can easily navigate through the screens in ecom instruments Settings to nd the parameter
you need to congure.
To move down a level in Intermec Settings:
• Tap the menu item in the list.
To move back a level in Intermec Settings:
• Tap Back or Cancel on the Tile bar.
To save a parameter setting:
• Tap OK.
To exit Intermec Settings:
• Tap Menu > Exit or OK.
Configure Profile Settings With Intermec Settings
A prole is a set of predened values that you can easily apply to the computer to ensure optimal
performance in a specic scenario. The end user does not need to gure out the right” settings
because we have already done that work for you. Prole Settings is available from the Start menu
so you can make it available to the end user for easy conguration.
Use ecom instruments Settings to determine the proles you want the end user to see in the Prole
Settings application.
1 Go to Device Settings > Prole Settings Application.
2 Select Camera, Power, or Scanning.
3 From the Camera, Power, or Scanning submenu, check or clear the Display check box for
the settings you want to have available to the end user.
4 Click OK to save your selection.
Restore Default Settings
You can easily restore a menu to its default settings or all of the
ecom instruments Settings parameters to their default settings if necessary.
1 Navigate to the menu that you want to restore to defaults.
2 Tap Menu > Restore Menu Defaults.
3 When prompted, tap Yes to restore the menu default settings.
4 If prompted to refresh the computer, tap Yes.
You can restore defaults settings for all parameters.
1 Tap Menu > Restore All Defaults. The applications asks if you are sure you want to restore
all defaults.
2 Tap Yes.
After several minutes, all of the default settings are restored.
Hide Menu Items in Intermec Settings
You can hide items in the Intermec Settings menus if you do not want to have them available for
other users to access. Hidden items are not saved when you back up your settings in the Smart-
Systems console.
On the mobile computer, you can:
hide menu items by tapping and holding the item, and then choosing Hide Menu Item from
Device Monitor Menu
Device Monitor Options Parameters You Can Configure
Device Health Controls
• Enable health data collection
• Enable device health appication
• Enable blue light (LED)
• Set rule le location
• Set data refresh periods
Device Health Secreen Captures Device health sceeen capture settings (directory and
screen capture allowed)
Disabled Executables None (read-only)
Device Wipe Device wipe settings (enable wipe and interval)
License Manager Menu
License Manager Options Parameters You Can Configure
About About settings (read-only)
License Vault None (displays applicaitions that are licensed)
Head Module settings
• Enable Modules
• Setup Modules
Virtual Wedge Menu
Virtual Wedge Options Parameters You Can Configure
Enable Virtual Wedge Enable virtual wedge
Virtual Wege Method Set virtual wedge method
Barcode Scanner Wedge Bar code scanner wedge settings (bar code scanner grid
and label encoding)
Magstripe Reader Wedge Magstripe Reader Grid
Location Services Menu
Location Services Options Parameters You Can Configure
Server Server settings (port and anable server)
Virtual GPS Virtual GPS settings