User's Manual

14 15
You can congure the screen backlight to turn off.
1 Tap Start > Settings > Power.
2 Tap Advanced on the horizontal scroll bar.
3 Select the screen power off settings for when the computer is on battery power or external
power.
You can congure the screen brightness using Intermec Settings or from the Start menu.
1 Tap Start > Settings > System > Backlight.
2 Adjust the slider to the desired brightness level.
3 Tap OK.
Adjust the Volume
You can adjust the computer volume for your needs and your environment. The volume includes
sounds you hear when you tap the screen or read bar codes with the imager. You can set the
volume to off, very low, low, medium, high or very high (default).
You can also use the buttons on the right side of the computer to adjust the volume:
• The upper button increases the volume.
• The lower button decreases the volume.
You can adjust the volume settings using Intermec Settings or the horizontal scroll menu.
1 Tap the Volume icon at the top of the screen, and then tap the volume icon on the
horizontal scroll menu.
2 Use your stylus or the u and d keys to adjust the volume slider to the volume you want, or
select Off.
Insert a microSD Card
You can use a microSD™ card to increase le storage and install software. The computers support
an optional 32 GB maximum capacity microSD card.

Note: The computer resets when you open the card access door to insert the microSD
card� Make sure you completely close the card access door before you use your
computer�
ecom instruments recommends using the following microSD cards:
Card Type Card Size ecom Part Number
ATP Industrial Grade microSD card 1 GB A0003477
ATP Industrial Grade microSD card 2 GB A0003478
ATP Industrial Grade microSD card 4 GB A0030305
ATP Industrial Grade microSD card 8 GB A0030306
Install a microSD card in a i�roc
®
Ci70 -Ex
1 Press the Power button to turn off the computer.
2 Remove the handstrap and the battery.
3 Remove the four Phillips screws and open the card access door.
Use the following table to understand the Intermec Power Options.

Note: The Real Time Clock (RTC) will persist through all of the power options as long as it
receives power from the Real Time Clock battery�
Intermec Power Options
Option Description
Suspend Medium power saving mode. The computer powers off all radios and internal
devices not involved in saving the system state, but the phone stays on to
receive calls. This option is the default setting. You can wake the computer by
pressing the Power button, pulling the scanner trigger, receiving a call, schedul-
ing an event such as an alarm, or by connecting external power.
Reboot The computer does not save the current system state, but the registry and
le systems are saved. The computer shuts down all running processes and
restarts.
Cancel The Power Options menu is cancelled.
Screen Off Lowest power saving mode. The screen turns off, but the phone, all radios, and
internal devices stay on. Tap the screen to turn the screen back on.
Shutdown Very high power saving mode. The computer turns off everything. You must
press Power or apply external power to restart the computer.
The Power Options screen is customizable. You can use Intermec Settings to determine which op-
tions are available to end users, the timeout until the default choice is selected, the default action
if no option is selected, or to disable the Power Options screen. For more information on custom-
izing the screen using ecom instruments Settings, see “Use Intermec Settings on the Computer” or
see the Intermec Settings Command Reference Manual.
About the Intermec Dashboard Button
If the Ready-to-Work light blinks, your computer may be experiencing a problem. Press the Inter-
mec Dashboard button (m) to launch the Intermec Dashboard application and view troubleshoot-
ing and status information.
You can press the m button at any time to bring up the Intermec Dashboard. If the computer is
not healthy, the current issues are displayed at the top of the screen. If the device is healthy, you
can use the Dashboard to view device information. For more information, see “About the Intermec
Dashboard”.
Configure the Screen Backlight
The display has an ambient light sensor that automatically adjusts the backlight intensity to con-
serve power and ensure the display is readable. By default, the screen turns off when there is no
activity with the computer. Press a key or tap the screen to resume activity.