User's Manual

12 13
Enter Characters on the Numeric Keypad
You need to use the orange modier key b and the green modier key c to access all characters
and functions on the Numeric keypad.
To type a character or access a function printed in orange on the overlay:
• Press b and then press the key for the character or function.
To type a character or access a function printed in green on the overlay:
• Press c and then press the key for the character or function. To type letters in the upper
right corner of a key:
• Press c and then press the key one to three times depending on the position of the letter.
For example, in the upper right corner of the 2 key there are the letters „ABC”:
• To type „c“ press c 2 2 2.
• To type „C“ press c 1 and then press c 2 2 2.
To only type letters:
• Press c c to lock the green modier key, and then press the key one to four times depend-
ing on the position of the letter.
While the green modier key is locked, press 1 to toggle between only uppercase and lower-
case letters.
To unlock the green modier key, press c.

Note: If uppercase letters are enabled and you unlock the green modifier key, you may
need to press
c 1 to type lowercase letters�
About the Power Button
When you press the Power button, a dialog appears with a list of power options. If you do not
select a power options setting, the currently selected action (the button outlined in bold) occurs
after the timeout.
The Intermec Power Options Default Screen
Store the computer for more than a
day.
If you are storing the computer for a few days, like over
the weekend, install a charged battery or connect the
computer to a power source.
If you are storing the computer for longer, remove and
charge the battery, and then store both the battery and
computer in a cool location. If you store the battery for
several months, recharge the battery to keep it at peak
performance.
Store the battery outside the computer. Store the batteries in a charger.
About the Keypad
The i.roc
®
Ci70 -Ex comes with either a QWERTY numeric keypad or a numeric keypad.
The computer has an ambient light sensor that detects low light and turns on the keypad backlight.
By default, the keypad backlight is enabled in low light conditions. You can disable the keypad
backlight to conserve power. Use Intermec Settings to congure the backlight. For help, see “Use
Intermec Settings on the Computer” on page 35.
i�roc
®
Ci70 -Ex QWERTY Numeric Keypad i�roc
®
Ci70 -Ex Numeric Keypad
Enter Characters on the QWERTY Keypad
You need to use the orange modier key b and the Shift key y to access all characters and func-
tions on the QWERTY keypad.
To type a character:
• Press the key for that character.
To type a character or access a function
on the overlay:
• Press b and then press the key for the
character or function. To only type char
acters or access functions on the overlay:
• Press b twice to lock the orange modier
key to stay on, and then press the keys for
the characters or functions.
To type a single uppercase letter:
• Press y and then the letter key.
To type all uppercase letters:
• Press y y to turn on Caps Lock, and then
press the letter keys. You can still type
orange modier characters by pressing
b and then the key for that character.
To turn off Caps Lock, press y.