User's Manual

Note:

If a network was detected in step 3, the SSID is automatically

entered and cannot be changed.

Enter a SSID into the Network Name box.

8. In the Connects to: box, select where your network connects to

(The Internet or Work).

9. If you want to connect to an ad-hoc connection, tap the This is

a device-to-device (ad-hoc) connection checkbox.

10.

If authentication information is needed, from the Configure

Wireless Network screen, tap the Network Key tab.

Note:

To determine whether authentication information is needed, see

your network administrator.

11. To configure the type of network authentication to use, select:

To use Shared Key authentication, t

ap the

Authentication (Shared mode) listbox. Type the

network key in the Network Key: box.

To use data encryption, tap the

Data encryption (WEP

enabled) listbox.

If a network key is provided by your network

automatically, tap the The Key is provided for me

automatically checkbox.

12.

For increased security, tap the 802.1x tab and select the Use

IEEE802.1x network access control checkbox. You should only

check this option if it is supported by your network

environment. Ask your network administrator if you are unsure.

13.

Select EAP type (PEAP or Smart Card/Certificate) from the

listbox.

14.

Once you have completed entering the network settings, tap

OK twice to save your settings and exit this menu.