User's Manual

ManualsBrandsEcolink Intelligent Technology ManualsElectronicsHome Motion Sensor

1x Sensor

1x Sensor mounting bracket

4x screws

2x jumper

1x battery

3x pieces of adhesive tape

STEP ONE Mount bracket to wall

First attach the sensor mounting bracket to the wall using either adhesive tape OR screws (optional). For best performance mount

the bracket 6.5 to 7.5 feet above the floor (2 to 2.3 meters).

Corner Mount Flush Mount

Note: For best results, attach adhesive tape to bracket FIRST, then position on wall. Adhesive tape is VERY STRONG so moving the bracket after attaching will be

difficult.

STEP TWO Attach Motion Detector to Bracket

Adhesive

Bracket

Screws

(Optional)

Once the mounting bracket is in place, align the holes on the

back of the motion detector with the key on the bracket. Slide the

sensor down on the keys until it snaps tight.