Product Specs

Page 9 of 10
6
doorbell
DoorBell Sound
7
error
Action Canceled Sound
8
Exit_delay
A loud chirp every second for 30 seconds then every
half second forever or another 30 seconds.
9
entry_delay
A constant tone.
10
away
Security panel in away mode.
11
stay_home
Security panel in Stay/home mode where the PIRs are
not active.
12
smoke_alarm
UL Specified
13
co_alarm
UL Specified
14
disarmed
Happy sound.
Manually Adjusting the Volume
The volume buttons on the side of the device can override the volume. Press the volume + to make the volume louder and – to make it quieter. Emergency
sounds like the siren will still play at full volume regardless of the current volume setting.
SD-Card
To override the built-in sounds via the SD-Card format an SD-card with a FAT16 filesystem. The sounds on the SD card must start with a decimal number
followed by the name of the sound with a .wav file extension. The encoding for the wav file must be mono TBD.
S2 Encryption
The device uses industry standard elliptic key cryptography to encrypt all sensitive communications. The DSK code on the device in the QR code and printed
below it is used for authenticating the encrypted command classes in the table above. A Security Enabled Z-Wave Controller must be used in order to fully utilize
the product.