Product Specs

Page 8 of 10
Backup battery level status
0x10
Back-up battery is low
System (0x09)
System Software Failure (Manufacturer
Proprietary Failure Code Provided)
0x04
Failure codes->
0x33 Watchdog Reset on the Z-Wave Module
0x55 Watchdog Reset on the STM32
Heartbeat
0x05
This is sent out periodically as configured by the
Configuration command class.
Sounds
There are 14 included sounds within the Chime+Siren, and the device can play sounds from the SD card either overriding the build-in sounds or adding to them.
Sounds are played with the Sound Switch Command Class, the Basic Command Class, and optionally with the Indicator Command Class. Volume is controlled
with the buttons, the Configuration Command Class, and the Sound Switch Command Class.
When a sound is played with the Basic Command Class and Indicator Command Class, then it plays at the current configured volume level.
Sound Number
Name
Description
1/255
siren
Intrusion Alarm
2
chime_front_door
Front Door Opening sound
3
chime_back_door
Back Door Opening Sound
4
chime_auxillary_door
Side Door Opening Sound
5
chime_window
Window Opening