User's Manual

9 | P a g e
Indicator (LED and Beeper) States
Event
LED Behavior
Beeper Behavior
Beeper Tone
SmartStart
3 green blinks (500ms on/off), off
for 3 seconds
None
None
Classic Inclusion
3 green blinks (500ms on/off), off
for 3 seconds
None
None
Inclusion in progress
repeated green blinks (100ms
on/off)
None
None
Secured pairing
completed
3 seconds green
1 second beep
Good tone
(2240 Hz)
Unsecured pairing
completed
3 seconds yellow
2 quick beeps: 200ms
on, 100ms off
Bad tone
(1050 Hz)
Inclusion failed
3 seconds red
None
None
Learn timeout
3 alternating red and green blinks
(500ms on/off)
None
None
Exclusion
3 seconds red
3 quick beeps: 200ms
on, 100ms off
Bad tone
(1050 Hz)
Factory Default Wait
red blinks(250ms on/off) for 10
seconds
None
None
Factory Default Success
5 seconds green
None
None
Powered on when
included
5 seconds green
None
None
Any button press
None
200ms beep
Button press
(2790 Hz)
Tilt sensor or external
contact pairing
successful
1 second white
1 second beep
Good tone
(2240 Hz)
Barrier Set Command
was ignored due to a
tilt sensor error or
safety issue
3 white blinks (250ms on/off)
None
None
Unattended close wait
period
repeated white blinks(100ms on,
150ms off)
repeated beeps:
100ms on, 150ms off
Good tone
(2240 Hz)
OTA Firmware Update
100ms green/100ms red, every
10 seconds
None
None