User's Manual

ManualsBrandsEcolink Intelligent Technology ManualsElectronicsDoor & Window Sensor

ADDITIONAL NOTES AND SUMMARY:

 With either mounting method the first step is to attach the sensor mounting bracket to door frame or window frame. (The mounting bracket is used regardless of choice

of screws or tape).

 The sensor can slide onto the mounting bracket in two different ways. To ensure that the sensor is securely fastened it is recommended that the tab on the bracket

engage the back of the sensor.

 Before attaching the bracket to a surface note how the bracket will need to be oriented in order for the tab to engage the sensor. The required orientation of the sensor

determines the bracket orientation.

 The sensor slides onto the bracket until the tab engages. Please be advised that adhesive tape may damage the surfaces to which it is attached.

BROWN PLASTIC HOUSINGS ( OPTIONAL )

Included with every Ecolink Door/Window Sensor is a second set of plastics in BROWN. If your door or window is darker in color, you may choose to use the BROWN cover for the

sensor and the BROWN plastics for the magnet.

MAX GAP: 5/8”

IMPORTANT: The edge of the magnet must align with the line on the sensor, AND the magnet must

locate next to the arrow on the sensor. Maximum gap between the magnet and the

sensor is 5/8”. If the magnet is not located following these rules, the sensor may not

get activated.