User's Manual

Track the connection progress of
the sensor
Your sensor will try to connect to your
base station. The sensor’s LED ring will
show you the progress.
Place your detector (but don’t
install it yet)
Hold the detector where you want to
install it. Make sure the detector detects
motion in the whole area.
Install your detector.
Use the bracket and tape or screws
included in your kit. The detector can be
mounted flush to the wall or angled in
a corner.
View detector history in the Ring
app
You should have a few history events
from installing your detector. Check
your app to make sure it’s working.
How to change the battery
Your battery should last quite a long
time, but when you need to replace it,
press the clip and remove the detector
cover.
Pull the tab on the detector
This connects the battery and turns on
the device. Your base station will find it.
12345
Blue Blinking
(30 sec)
Waiting to
connect
Blue Blink
(5x, quick)
Couldn’t add
to base station
Blue Blink
(1x)
Motion
detected
Blue Blinks
(3x)
Sensor
tampered
Blue Solid
(5 sec)
Connected
4.
Install your
Ring Motion
Detector on
the wall.
5.
Some
additional
details about
your detector.
© 2017 Ring Inc.
RING, ALWAYS HOME, and CHIME are trademarks of Ring Inc. Last updated: 09/04/17
Ring_Motion_Detector_Manual.indd 18 9/4/17 8:43 PM