User Manual

Patient Safeguard System® Patient Bed Installation
UltraClenz, LLC
Page 8
4. Installation
4.1 Bed Beacon Mount Installation
The Bed Beacon Mount can be mounted directly to the frame of the bed itself (see Figure 3).
Figure 3. Bed Beacon Mounted on Patient Bed Model Hill-Rom Versa Care P3200
Tape mounting
Mount the Bed Beacon Mount onto the metal surface with the double-sided tape (supplied) and secure with the 14”
long cable tie. Make sure the Bed Mount and the mounting surface are clean and free of dirt and oil. Spray a
mixture of Dawn soap (1% of Dawn soap per a gallon of water) and scrub the mounting surface with a plain Scotch-
Brite scouring pad. Wipe the surface with a lint free cloth to clean off any contaminants. Then use a soft cloth
dampened with isopropyl alcohol to further clean the mounting surface. Repeat the process as necessary. Ensure the
mounting surface is dry before attaching antenna and firmly push and hold in place for several minutes (see Figure
3).
4.2 Bed Beacon Installation
The Bed Beacon (see Figure 4) chips directly into the Bed Beacon Mount.
Figure 4. Bed Beacon Installation
Bed Beacon
14” Long
Cable Tie
Bed Beacon Mount