User Manual

Patient Safeguard System® Patient Bed Installation
UltraClenz, LLC
Page 24
3. Place cable tie holders and route the ALP Sensor cable along the inside rail and tie down any excess cable
(Service Loop) as shown (see Figure 8).
4. Place a cable tie holder and route the ALP Sensor cable as shown (see Figure 9).
Head of the bed
Foot of the bed
Figure 8. ALP Sensor Cable Routing and Cable Tie Holder Placement
Figure 9. ALP Sensor Cable Routing to Dock and Cable Tie Holder Placement
Head of the bed
Foot of the bed
Service Loops