User Manual

Patient Safeguard System® Patient Bed Installation
UltraClenz, LLC
Page 20
Appendix C - Patient Bed Hill-Rom Versa Care P3200 Installation
1. Installation
1.1 Step 1: Installing the Bed Antenna (FAS1540) on the Bed
The patient bed must be raised to a height of 32 inches from the floor to gain access to all of the mounting locations.
Tape mounting
Mount the Bed Antenna under the bed on the metal surface shown in Figure 1 with double-sided tape (supplied).
Make sure the Antenna and the mounting surface are clean and free of dirt and oil. A soft cloth dampened with
isopropyl alcohol works well to clean both surfaces. Firmly push and hold in place for several minutes (see Figure 1).
Figure 1. Bed Antenna Installation Location on the Bed